Pacifico Adventure 72 is ideal for relaxing on the water. This is the first composite hull on an epoxy binder reinforced with corrugated sheets that will demonstrate the advantages of high technologies of shipbuilding in the class of vessels up to 10 m. The new project will become a solution for those who want to change the usual RIB for a full-fledged cabin boat. Two berths, walk-around and a speed of more than 30 knots with one Suzuki DF140ATL engine.
Starting to work on the project Pacifico Adventure 72, we thought primarily about the "family" type of shipowner, perhaps making the first steps in the "water" form of leisure. The vessel is intended for inland water bodies and coastal waters of the seas. It is transportable - it can be transported on a trailer behind a car. The vessel can also be used as a government boat - by state structures and organizations, and, accordingly, it can be saturated with necessary equipment.
The whole ideology of PA72 is aimed at the functionality and convenience of operation on water. The architecture and exterior are oriented to the convenience and safety of work on the deck - this is a typical walkaround, both for service ships, and for pleasure boats of the "scandinavian" type. Direct felling and glazing minimize the "concealment" of useful space, and provide the necessary protection of the control post in the climatic conditions of Russia. The project Pacifico Adventure 72 is developed on the basis of international standards ISO Small Craft, used for CE-certification of small pleasure craft in the EU countries.
The project is developed by the CB "Albatross Marine Design", chief designer is Albert Nazarov.
|Construction||Carbon fiber reinforced epoxy composites|
|Passenger capacity||5 passengers|
|Maximum draught||0.43 m|
|Engines||1 x 140 HP|
|Fuel tank||1 x 450 l|
|Maximum speed||30 knots|
Basic configuration of the catamaran «Pacifico Voyager 109» is presented in the technical specification
|Colors of the elements||Board||Cabin||Waterline|